|
|
| About Us |
| |
Pickling bare wood furniture is relatively easy to make, as long as you properly prepare the wood surface. A Wood stain penetrates into the fibers of the wood, but offers no protection, it must be stopped. There are different types of spots available, such as oil, alcohol, water and acrylic.
It is the kind of stain onto the wood to reach the goal you seek, and your experience in coloring wood furniture. For example, spirit stains dry very quickly so it will be difficult, you can also get to report. Most beginners look at the end with dark patches of color, the overlap is not quite reach it wanted. Water stains can be used only after the wood has been sanded first.
You may want to stain the furniture any color, as you can mix and match compatible stains and dyes color. You would an oil stain with sanding sealer sealer before applying paint. Do not use a virtual patch if you intend to French polishing of furniture. When using water or acrylic stains, you must allow them to dry properly. This means leaving the piece for at least 48 hours. Otherwise, if you apply the sealer, you can get a white veil impact on the forest. Always test in an inconspicuous place before the first application of the sponge to the entire unit.
Be careful if you want to stain darker furniture that the wet spots are always finish darker than the dried. You want to apply no more than two layers, it might be incomplete. You have to try to get as good a match to the color you want to achieve as possible in the first round.
Staining wood furniture takes time and patience but the finished result will be worth it.
Contribute a better translation. |
|
|
|
